Pc-concepts Full-Rated Router ADSL2+ Manual do Utilizador descarregar pdf (Página 33)

Step 16: DSL Router Webpage will show as below:

4.5 Setup ADSL Router via USB Cable on Linux

This driver supports Linux-2.4 kernel.

Compiling the Driver

To compile the driver simply run make in "viking" directory. This will create binary driver

with name VKGEther.

% make

Loading the module

To load the VKGEther module enter the following command as root in directory "viking"

Syntax:

% insmod ./VKGEther {Module Options}

Unloading the module

To unload an unused module:

% rmmod VKGEther

You will need to exit or disconnect any program currently using the module before it

unload. If the module was configured for LAN, shutdown the ethernet interface:

% ifconfig eth1 down

The ethernet interface associated with the VKGEther driver was "eth1" that's why

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 103 104

Sem comentários

Pc-concepts Full-Rated Router ADSL2+ Manual do Utilizador Página 33